The A/LP2 Series pressure transmitters incorporate a durable piezoresistive sensing element to enable low pressure measurements. Integrated temperature compensation with offset and span calibration extends the performance of these devices to provide excellent long term reliability.
The transmitters must be powered by a +18 to 36VDC or 24VAC supply. Outputs include 1 to 5, 2 to 10VDC, or 4 to 20mA and are dip switch selectable. The uni-directional spans range from 0-1” to 0-20” of water column or 0-0.30kPa (300 pascals) to 0-2.5kPa (2500 pascals) and most models offer additional field selections.
The A/LP2 Series has the option for an easy to read display which provides an initial set up reference, trouble shooting assistance, and performance monitoring. The cord grip fitting allows for internal wiring to a 3 pole depluggable screw terminal block. All units are calibrated using NIST certified references. In addition, three and five point NIST certificates of calibration are available upon request
For your sensor and pressure transmitter needs rely on Automation Components, Inc and Stromquist and Company.
One Response
Very nice post Mr. Jones !!