Choosing dampers can be a mind boggling experience, but once you have an understanding of the basics and a few well asked questions, your needs can be quickly and expertly filled using Honeywell Commercial Dampers.
The first Honeywell Commercial Damper we will look at is the D series of rectangular dampers. The D series is broken down into 3 types the D1, the D2, and, you guessed it, the D3 series. Here are the basics.
D1… ultra low leakage design based at 6cfm @ 4”wc with a velocity rating of 2500-4000 fpm. The blade seals are silicone and the jamb seals are 304 stainless steel.
D2…low leakage design based at 10cfm @ 4”wc with a velocity rating of 2000-3000fpm. The blade seals are extruded vinyl and the jamb seals are 304 stainless steel.
D3…low leakage design based at 120cfm @4”wc with a velocity rating of 2000-3000fpm. These dampers do not have blade seals or jamb seals.
All the rectangular dampers can be fully optioned and sized depending on the client’s needs.
Competitive comparisons:
D1…Ruskin CD60 and the Greenheck VCD33
D2…Ruskin CD36/46
D3…Ruskin CD35 and the Greenheck VCD20
Note: Actuators for the rectangular dampers can be sized by knowing the proper torque needs for the actuator. The formula is: damper size (length X width) X rated torque multiplier X safety factor = Actuator in-lb torque requirements.
Commercial Round Dampers from Honeywell are available from 6” to 16” with or without actuators.
The D690 series is without actuator, and the DM7600 series come mounted with a Honeywell actuator with a 90 second timing and a 2-10 Vdc or 4-20 mA ( Honeywell ML7161) or SPDT Floating (Honeywell ML6161) series actuator.
If you are a Stromquist customer located in Georgia or Florida and you need help sizing or ordering a commercial damper you can contact Stromquist and Company at www.stromquist.com or call us at 1-800-241-9471. All others can order this product from one of our affiliates at CGNA.