Functional Devices, Inc. a leading manufacturer of high quality, contractor-friendly products since 1969,has just released their PSH550-UPS-BC, which is an Enclosed BACnet Network 550 VA UPS Backup Power Control Center that can be integrated into your BACnet network to monitor these variables/integer values:
BACNET® VARIABLES USED IN THIS MODEL
• Integer Value 1
Line or UPS
Indicates whether the power is being supplied to the UPS via battery or utility line
0 = Line
1 = UPS
• Integer Value 2
UPS Percent Load
Percentage (of 100%) of the total capacity of the battery UPS battery-backed outlets currently
being consumed
• Integer Value 3
VA Load
VA (Volt-Amperes) being consumed by loads connected to the battery backed outlets of the UPS
(of 550VA)
• Integer Value 4
UPS Battery Capacity
Percentage of the total battery power remaining (of 100%)
• Integer Value 5
USB Connection
Shows the connection between PSMN2RB10 to UPS is viable
0 = No connection
1 = Connected
• Integer Value 6
Remaining Battery time
Run time, when powered by battery, remaining (minutes)
*UPS Percent Load and VA Load are only calculated when power is cycled to the UPS and refer
only to the loads plugged into the UPS backed-up outlets (top row of UPS).
One Response