Sierra Monitor Corporation Case Study on Telecom Site Remote Monitoring

SMC_1Telecom Site Remote Monitoring: The telecommunications industry includes regional operating companies, traditional long distance carriers, wireless carriers, and cable and satellite service providers; they all deliver voice, data, and video services. Sierra Monitor Corporation shares its extensive expertise about this universal, yet challenging application.

Telecommunications companies often house their “last mile” equipment in unmanned sites. Site structures include controlled environment vaults (CEVs), walk-in cabinets, and cell site buildings. For communications companies, “up time” is revenue, and “downtime” is lost revenue. Each structure contains highly sophisticated communications equipment to deliver services rapidly and reliably to customers. Uninterrupted site availability, safety, and therefore uptime is enabled by many supporting systems or devices such as heating, ventilating, and air conditioning (HVAC) systems, generators, DC plant and batteries, occupancy sensors, and environmental sensors.

A best practice for increasing site uptime and improving the safety of the personnel who occasionally have to visit the site is to implement an environmental controller that builds upon a standard set of sensors and relay outputs.

SMC_CEVTelecom Site Structures: CEVs are unmanned structures that are installed underground. In addition to communications equipment, CEVs house large banks of constantly charged lead-acid batteries to provide power when a grid power failure occurs, similar to data centers. An environment control system manages dual air conditioners to maintain temperature conditions that are “comfortable” for the equipment during normal unmanned operation, and “comfortable” for the technician when the structure is occupied. The system also manages lights, emergency lights, sump pump, smoke alarms, and door status switches. All abnormal conditions are passed to an alarm handling system for central office notification.

Other structure types include small walk-in cabinets and larger single room buildings. They employ environment control systems similar to those found in CEVs. The primary difference is that the above ground buildings use external, wall-hanging HVAC units that require lead-lag management to ensure equal run time on each air conditioner.

All field structures are connected to head-end computer rooms that are generally located in central office buildings. The subterranean field cabling connections, known as the “back-haul,” enter a cable vault in the basement of the central office. Immediately adjacent to the cable vault, is a power plant with 48 VDC power supplies and rows of battery packs. As with CEVs, many support elements are required to maintain a sustainable environment for personnel.

Gas and Fire Detection — Hazardous gases found in telecom sites include:

Combustible Gases
Methane
Hydrogen
Hydrogen Sulfide
Carbon Monoxide, leading to Oxygen Deficiency

CEVs and central office buildings use lead-acid batteries which produce Hydrogen, a combustible gas. The high density of electronic systems increases the risk of fire. Cable vaults are enclosed, poorly ventilated areas with potentially high Carbon Monoxide and low oxygen content. As all of the structures are connected to a central office over long distances, the underground cables may pass through hostile subterranean soils such as nearby wastewater facilities and landfills. As these sites contains various amounts of decomposed waste, Methane or Hydrogen Sulfide may leak into the cables and bring the hazard to the cable vault of a central office facility. Hazardous gas and fire detectors are required to detect and mitigate these hazards within telecom structures.

Automating Telecom Sites: Most telecom site structures require proper cooling to operate efficiently. Thus, a control system that can specifically execute full HVAC control to assure a safe environment for equipment and personnel is necessary. Telecom sites may look to a lead lag controller for air conditioning units. As a structure may have two air conditioning units, a lead lag controller can control the cycle periods in which they operate, with one unit running first (lead) and the other unit following (lag) as the first turns off. Gas monitors may also be connected to HVAC units to act in event of a release of hazardous gas. The control system therefore incorporates gas monitors and takes preventative action, such as increasing ventilation to mitigate the gas risk.

Centralizing all data is important for telecom site owners, for some of the structures are remotely controlled and rarely accessed by personnel. All data from various sensors, devices, and systems can be transferred to one central control system to improve safety, efficiency, and the operation of all telecom sites.

Upcoming Trade Shows and Events: January 25-27, 2016: 2016 AHR Expo

Booth #1159 at Orange County Convention Center, 9800 International Dr, Orlando, FL 32819
Application cloud solutions are increasingly being used within our industry. Companies want to work with big data in the cloud, analyze and see what they can do with the data, and take actions based upon this data. However, where will this data come from? Often times, it may be a pain for someone working in the application cloud to retrieve this data. With our track record in the automation industry and focus on the IIoT mega-trend, come see us at Booth #1159 to see how we have positioned ourselves to be the “on-ramp” solution provider for the IIoT.

To attend the AHR Expo, you must receive a badge. Register for a badge here.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Reply

Your email address will not be published. Required fields are marked *

BE IN THE KNOW

Join 7,597 other subscribers