Commission a Variable Frequency Drive in 36 Seconds?

Starting up a variable frequency drive can be as much an art as it is a science, and because a variable frequency drive can save so much money, you are going to see them on just about any project you bid. When you are estimating a job, how much do you add for the variable frequency drive? The price of a drive is easy to figure (the price is the price), so conventional wisdom would say go with the low price drive. But is that really the smart move?
Most of the pros I know say no. Here is why: they tend to think in terms of cost to install and maintain instead of just price. Back to estimating that job… you have the price of the variable frequency drive, but how do you estimate the cost to install the drive and to commission your variable frequency drive?
Like most things in life you don’t get something for nothing, and the lower priced variable frequency drives are lower priced for a reason. It is not that they don’t do what a variable frequency drive is supposed to do.  The lower priced drives take out features that a mid priced variable frequency drive like the Honeywell Variable Frequency Drives Guide Specification include:  things like start up wizards and English language prompts on the keypads that are intuitive  and  make set up easy. How easy? Check out Brian doing a basic commissioning of the new Honeywell variable frequency drive in 36 seconds. How cool is that ?

A lower priced drive can look attractive but can take a lot longer to set up and commission. Forget about a keypad or at least forget about one that does not require you to look up code in a manual to see what each of the prompts mean. Forget about the wiring terminals being bigger and easier to wire; plan on sending your best techs out to the job and be sure to put in extra hours for the complications that can arise from being “penny wise and pound foolish.” Also, plan on spending extra time with your customers explaining how the drive works. Remember, the product you leave on the job site in many ways is a reflection of your company. I am not saying “all low price drives are a bad decision,” I am saying that you must think in terms of overall cost and not just price when it comes to which variable frequency drive you purchase.
With the new Honeywell Variable Frequency Drive your estimating is easier. Because of the easy setup wizards and the removable keypad display and the intuitive prompts, you don’t have to send your best variable frequency drive person to do start up. Also, because of the removable keypad that stores the set up parameters, you can program once take the keypad  and download the setup into other drives.
Although the Honeywell Variable Frequency Drive might not be the lowest priced drive, the smart money says it is the lowest cost drive to install and own. It is a quality product that will make your customers appreciate you for installing Honeywell.

One final thought as you are estimating your variable frequency drive job and looking for a way to lower your cost — a question you might ask is “do you really need the bypass?”  For an enlightening perspective on variable frequency drive bypasses, check this out.
Stromquist & Company is the authorized Honeywell Variable Frequency Drive distributor for Georgia and Florida and look forward to helping you with all your HVAC control and Variable Frequency Driveneeds. If you are not a Stromquist customer or are not located in Georgia or Florida one of our affiliates at Controls Group North America or a local authorized Honeywell distributor can assist you with your Honeywell Variable Frequency Drive needs.


14 Responses

  1. Normalerweise ist es bei dem Oberbegriff Set up a Variable
    Frequency Drive in 36 seconds ! | Control Trends
    by Stromquist für mich immer essenziell, dass die vielen Beiträge genauestens kontrolliert
    werden, damit man nichts falsch versteht. Genau das scheint mir auf dieser
    Website 100%ig Usus zu sein. Deswegen schmöckere ich in diesem Blog auch häufig gerne.

  2. Vielen dank fuer Ihre Post! Wir alle wissen schoen wie gut die Deutsche Systeme sind. Mach nur weiter und alles gute!

  3. Hello There. I discovered your weblog the usage of
    msn. That is a very smartly written article.
    I’ll be sure to bookmark it and come back to read more of your helpful info. Thank you for the post. I will definitely comeback.

  4. Attractive element of content. I just stumbled upon your site
    and in accession capital to assert that I get in fact loved
    account your blog posts. Anyway I will be subscribing
    on your augment or even I success you get admission to
    constantly fast.

    Check out my webpage – smart pgone

  5. what is the right model of vfd that is compatible to run a 5hp 3phase motor with a 220v single phase power supply?

  6. Ι know this web site provides qualitʏ dependent articleѕ or reviewѕ and otther material, is there any other web ρage whcһ provides these data
    in quality?

Leave a Reply

Your email address will not be published. Required fields are marked *

Stay In The Know. Join The Control Trends Newsletter.

What Type of Content Would You Like to Receive?
This field is for validation purposes and should be left unchanged.