CSA-Approved Vent Free Gas Regulators

What’s the big deal about vent free gas regulators? What’s the hubbub concerning CSA-Certifications? Why is Stromquist, in the words of Eric Stromquist, “pumped” about Pietro Fiorentini gas regulators?

These are questions that are asked on a daily basis, so I want to address them and shed some light on the true facts about Pietro Fioentini gas regulators, known as PF gas regulators by our staff.

User-friendly in terms of function and installation, PF gas regulators are designed for the United States market with contractors and distributors in mind.   Over the years the contractor and distributor have been faced with many costly and difficult situations concerning the venting of gas regulators.  Manufacturers addressed this problem with the development of vent free gas regulators, which worked nicely over the years, but restrictions such as regulator capacities and available sizes have not been keeping up with today’s needs — until the introduction of the PF regulator.

No longer is your client restricted to low capacities and small sizes.  The PF regulators are available in sizes from ½” pipe to 4” flanged with CSA Certified capacities to 40,000,000 BTUs per hour at a 2 psi inlet pressure. Let that sink in for a moment. With this type of a regulator selection to choose from, no longer will new roofs lose their warranty because vent lines need to be punched through, no longer will construction or installation costs skyrocket because costly vent lines need to be run, no longer will costly installation materials to make up these vent lines need to be purchased, and no longer will excess gas be escaping in our over-burdened atmosphere, which will allow us to be GREENER.

Pietro Fiorentini gas regulators are CSA Certified and approved for Class 1 and Class 2 installations. Class 1 installation means a gas regulator with a maximum inlet pressure of 2 psi and a gas outlet pressure of 14” water column maximum. Class 2 installation means a gas regulator with a maximum inlet pressure of 5 psi and a gas outlet pressure of 2 psi maximum.  Always check with your local codes for any other requirements.

Bottom line, let’s look at what makes money:  supplying a product that saves us money, reduces our cost of installation and materials, reduces our inventory, and increases our ability to service our clients with the newest approved technology.

Now you know why Stromquist is “pumped” about the PF gas regulator.  Even more, this 90% recyclable gas regulator is not just GREEN, it’s the color of money GREEN.

If you are a Stromquist customer or are in GA or FL, call your Stromquist rep for help with your gas regulator needs. If you are out of the states of FL or GA, please call Bill Jones at 1-800-241-9471, extension 1419  to find a distributor in your area.


23 Responses

  1. Hello Bill

    Can you tell me what the difference is on a locking regulator as opposed to non locking?
    We are using a class 1 reg on a 2 lb system going to an 11 ” WC gas appliance regulator.
    How can I be sure that the ORA Type 90 Class 1 reg is a “locking” type reg?
    we are having hard cold start issues (top burners won’t light first thing in the morning)



  2. A locking regulator is a regulator that will close off bubble tight when the downstream pressure reaches regulator spring set point.

  3. Hey there, You have done an incredible job. I’ll definitely
    digg it and individually suggest to my friends. I’m sure they will be benefited from
    this website.

  4. Needed to put you that little bit of remark to be able to thank you as before relating to the
    spectacular guidelines you have shared above. This is so incredibly open-handed of people like you in giving unreservedly all a number of us could
    possibly have offered for sale as an e book to make
    some cash for themselves, even more so given that you might well have done it if you considered necessary.
    These advice in addition acted to become good way to
    realize that the rest have the same fervor the same as my personal own to know the truth
    a great deal more with regard to this matter. I’m certain there are numerous more enjoyable instances up front for many who look over your website.

  5. Good blog you have got here.. It?s hard to find good quality
    writing like yours these days. I really appreciate individuals like you!
    Take care!!

  6. I’m still learning from you, as I’m improving myself. I definitely love reading everything that is
    written on your site.Keep the posts coming. I enjoyed it!

  7. Hi there, just was alert to your blog thru Google, and found that it’s truly informative.

    I am going to watch out for brussels. I will appreciate
    for those who continue this in future. Many other folks might be benefited out of your writing.

  8. It’s really a great and helpful piece of information. I
    am glad that you shared this useful info with us.
    Please stay us up to date like this. Thanks for sharing.

  9. Very nice post and straight to the point. I don’t know if this is
    in fact the best place to ask but do you people have any thoughts on where to employ some professional
    writers? Thanks 🙂

  10. Hi, i feel that i saw you visited my site so i came
    to go back the prefer?.I am trying to in finding issues to enhance my site!I suppose its
    ok to make use of some of your concepts!!

Leave a Reply

Your email address will not be published. Required fields are marked *

Stay In The Know. Join The Control Trends Newsletter.

What Type of Content Would You Like to Receive?
This field is for validation purposes and should be left unchanged.