Honeywell’s LNS Plug-in for Stryker VAV Controllers

HW_StrykerHoneywell is pleased to announce the availability of the Stryker VAV LNS Plug-in 2.3.0.

Some new and existing BAS installations utilizing LonMark® devices may use general-purpose tools that utilize an LNS Plug-in Director such as Echelon’s LonMaker Integration Tool. This plug-in allows simplified configuration of the LON Stryker VAV devices within a plug-in director.

Application Requirement and Compatibility: The plug-in can be used with Honeywell Stryker VAV controller models CVL4022AS-VAV1/U and CVL4024NS-VAV1/U. Please refer to the Compatibility Section in the Software Release document for environment requirements on PC Operation System, LNS Server, LonMaker, and CARE version requirements.

The SRB will be included in the software release package located on The Buildings Forum – Home > Honeywell Stryker > Stryker VAV LNS Plug-in 2.3.0

Product Availability: The plug-in can be downloaded from the Honeywell Buildings Forum, free of charge, by navigating to the following path: The Buildings Forum – Home > Honeywell Stryker > Stryker Tools > Stryker VAV LNS Plug-in 2.3.0

Recap of Stryker Controller: Since its launch in 2012, the Honeywell Stryker controllers have gained popularity from a variety of users by providing a configurable, application specific controller with a customizable accessory loop feature.

Additionally, the Stryker controller provides ease of use and flexibility, at a more competitive price point than a programmable controller. With the newly released LNS Plug-in, the Stryker controller can be configured through broader tool sets to suit the needs of different installations.

Note: The license restriction previously in place on Stryker controllers was removed in 2014 and the controller can now be configured on any JACE with an open NICS.


One Response

Leave a Reply

Your email address will not be published. Required fields are marked *

Stay In The Know. Join The Control Trends Newsletter.